>
EnviroCLEAN Parts Cleaner Powder is a powerful, concentrated bio-remediating parts cleaner with superior cleaning capabilities which eliminates the waste disposal costs, as well as health and safety risks.The EnviroCLEAN Parts Cleaner Powder is a mixture of naturally-occurring microbes and several enzymes coupled with a nutrient package that accelerates the bioremediation process. Effectively degrades gasoline (BTEX), diesel, motor oils, greases, anti-freeze, hydraulic fluid, brake fluid, ATF, cutting fluids as well as animal and vegetable oils and heavy synthetic oils and greases. Contains corrosion inhibitors to prevent flash rusting.
Add one scoop (16 ounces) per 5 gallons of water used. For best results, heat the solution to 125° F. Agitate for heavy, stubborn hydrocarbon build-up. Replace when solution becomes cloudy (approximately 30 to 120 days) depending on soil load, concentration and frequency of use.Drain excess oils and fluids from parts before placing in the solution. Do not pour any type of oils and fuels into solution for disposal purposes. Do not use chlorinated solvents or add other cleaners or chemicals to the solution. Never exceed 120° F. Filters for removing solids must be cleaned (if applicable) and/or solids removed from the
bottom of reservoir periodically.
5-Gallon Pail | ![]() |
EnviroCLEAN Parts Cleaner Liquid is a powerful, concentrated water-based bio-remediating parts cleaner with superior cleaning capabilities which eliminates disposal costs, as well as health and safety risks. The EnviroCLEAN Parts Cleaner Liquid is a mixture of naturally occurring microbes and several enzymes coupled with a nutrient package that accelerates the bioremediation process. Effectively degrades gasoline (BTEX), diesel, motor oils, greases, anti-freeze, hydraulic fluid, brake fluid, ATF, cutting fluids as well as animal and vegetable oils and heavy synthetic oils and greases. Contains corrosion inhibitors to prevent flash rusting. Designed for use with most manual parts washers.
EnviroCLEAN Parts Cleaner Liquid is a concentrate and must be diluted with water before use. Dilute 1 part of EnviroCLEAN Parts Cleaner Liquid with 20 parts water. Type, age and build-up of soils will determine cleaning time and life of solution, as well as the soil load, concentration and frequency of use. Drain excess oils and fluids from parts before placing in solution. Do not pour any type of oils and fuels into solution for disposal purposes. Do not use chlorinated solvents or add other cleaners or chemicals into the solution. Circulation and aeration are essential for microbial growth as continuous aeration is recommended. Fluid should be heated before and during use (usually 100°F to 110°F) Never exceed 120°F. Filters for removing solids must be cleaned (if applicable) and/or solids removed from the bottom of reservoir periodically. A significant decline in cleaning strength is a sure sign that the system may be overloaded or the microbes may not be functioning as intended for some reason (causing an oil build-up). Foul odors indicate that the aerobic population is low and sludge is probably collecting at the bottom of the reservoir. Be certain the fluid is getting adequate aeration and circulation and that everyone is following the recommended guidelines for both product and machine use.
5-Gallon Pail | ![]() | 15-Gallon Drum | ![]() | 55-Gallon Drum | ![]() | 275-Gallon Tote | ![]() |